Portland Hardwood Refinishing by DeBuke

How To Pick The Right Sandpaper Grit For Refinishing Hardwood Floors

Thu, 25 May 2023 17:14:57 GMT

Choosing The Right Grit Sequence To Refinish Your Hardwood Floors

For those of you who are DIYers looking to refinish your wood floors , it's important to know that the grit sequence of the sandpaper you're using is one of the most important aspects in floor refinishing. In our experience, we've seen plenty of DIYers mess this part up and then call us because they can't figure out what went wrong. So let's talk about the basics of the sandpaper grit and what you need to know before you turn the sander on!

Why Choosing The Proper Grit Matters

Choosing the correct grit type means that you'll actually have smooth surface on your floors that's ready to be either stained or refinished. The correct grit sequence will ensure you have no scuffs, marks, dents, or sander grit lines. This is what you want so after the floors are finished, they look silky smooth.

This should be pretty obvious, but let's talk about what happens if you DON'T choose the correct grit sequence in your floor refinishing.

When using a floor sander, you know it's big and heavy right?! And you know it's designed to remove layers of the floor so you can refinish it right? The wrong grit can leave sander lines all throughout the floors. This looks extremely ugly but often doesn't show up until you start putting the polyurethane down. By that point, you almost need to start the whole process over. And you know you only have so many layers on the floors to sand so mistakes can be costly down the road.

Aim For A Course-To- Fine Grit Sequence

The overall goal of choosing the right grit is to start with a course grit and transition to finer grit sandpaper after each round of sanding. We recommend at least 3 rounds (or passes) of sanding on the floor. You begin with a course level grit. The second pass is a medium level grit and the third pass is the fine grit. If your floors are really scuffed or messed up, you might add an additional pass at the beginning with an even courser grit sandpaper.

For example, if hardwood floors have been buried underneath carpet for years and have an adhesive stuck to them from the carpet, you likely will want 4+ passes with the sander. The first two are course grit and then you continue with medium and fine.

Common Sandpaper Grits For Refinishing

12 - 16 Grit : Very Course
20 - 24 Grit : Very Course
36 Grit : Course
60 Grit : Medium
80 Grit : Fine
100+ Grit : Very Fine

12 Grit : This grit is usually only available for edgers anyway. It's for the harshest and most beat up floors that often include heavy adhesives or multiple coats of paint or stuck under thick carpet for years. This digs through all the clutter to get to the actual wood.

16 Grit : This is usually the starting grit for floors with heavy shellac finishes or just a small amount of paint on them (often only one layer). If you happen to have hard maple wood floors, this grit will also be your starting point in most instances.

20-24 Grit : If your floors need a decent amount of flattening, this is the range you might start in, unless you've already used a courser grit and see obvious sander streaks in the floors. The 24 grit is usually a good starting grit for wood floors that haven't been refinishing in 25-30 years.

36 Grit : If you have newly installed wood floors that haven't been sealed yet, this is likely where you will start the sanding grit at. This grit will help remove any over wood from the installation process. This could sometimes be used if you have a very thin layer of finish left on the floors. After this round, there should be no poly or finish left on the floors.

60 Grit : This is NOT your starting grit. Ever. This grit does not remove much wood from the floors, it's mostly intended to remove any scratches from the previous 36-grit sanding process. Again, do not start with this grit sandpaper on your wood floors.

80 Grit : This simply takes out the scratches from the 60 grit pass. In most homes, this is the final pass to get the floors ready for finishing.

100+ Grit : If you plan to stain your wood floors, you might need a 100 grit pass also. Or if you have birch or maple floors, you likely will need this 100 grit pass to get those harder woods perfectly smooth. There are a few grits larger than 100 and you can use them if you notice marks or scratches leftover from the 100 grit pass. They are likely overkill in any other circumstance though.

The Most Common Grit Sequence For Refinishing

The most common grit se quence is a 3-pass sanding with 36 - 60 - 80 grit. To be clear, this is not usually used for hard woods like maple or birch, nor is it recommended for wood floors sitting underneath carpet or that have heavy adhesives attached to it. This common sequence is floor normal use wood floors that are already finished and are just looking to refinish them and bring them back to life.

If You're Unsure, Start Here

If you aren't sure where to start with sanding your floors to refinish them, start with a small handheld sander using 36 grit sandpaper. Go to an area of the room that looks most troublesome. Sand down a 2' x 2' section in that difficult area and see what the results are. Don't be afraid to sand tough on the floors, they can take it. If you notice that there's still clear bumps or that all the adhesive or paint isn't coming up, you likely need a courser grit to start. Try a 24 grit and go to a new tough spot (can be right next to it) see what happens. Since this spot is likely still quite challenging for sanding, you can be confident the other areas won't be as bad when you use the actual belt sanding machine later.

If you already have a gut feeling that your floors are going to be rough, skip the test and just start the belt sander with the 24 grit. Plan on doing 4 passes at least with 24-36-60-80 and see what they look like.

If you live in Portland and would like a professional opinion, feel free to contact us and let's talk about your floors!

Which is Better, Water Based or Oil Based Polyurethane for Wood Floor Refinishing

Thu, 27 Apr 2023 18:01:58 GMT

Water vs Oil Polyurethane For Refinishing?

Hey there! If you're looking to refinish your hardwood floors , one of the biggest decisions you'll have to make is whether to use water-based or oil-based polyurethane. It can be a tough choice, but don't worry – I'm here to help!

First, let's talk about the differences between the two. Oil-based polyurethane has been around for a long time and is known for its durability and depth of color. It's also slower-drying than water-based polyurethane, which can be an advantage if you're new to refinishing floors and need more time to work with the finish. However, oil-based polyurethane has some drawbacks as well. It's high in VOCs (volatile organic compounds), which can be harmful to breathe in and require more ventilation during application. It also yellows over time, which can be a concern if you want to maintain a lighter color for your floors.

On the other hand, water-based polyurethane is a newer option that has gained popularity in recent years. It's known for its low VOC content, quick drying time, and clear finish that won't yellow over time. It's also easy to clean up with soap and water, which can be a major advantage for DIYers. However, water-based polyurethane is less durable than oil-based, meaning it may not hold up as well against scratches and wear and tear.

So, which one is better? Well, it depends on your priorities. If you're looking for a finish that will last a long time and don't mind dealing with higher VOCs and a longer drying time, then oil-based polyurethane might be the way to go. If you're more concerned about indoor air quality and want a finish that won't yellow over time, then water-based polyurethane could be the better choice.

It's worth noting that some flooring professionals recommend a combination of both types of polyurethane. For example, you could use oil-based polyurethane for the first coat to provide a deep color and durable base, then use water-based polyurethane for the subsequent coats to provide a clear finish that won't yellow. This can provide the best of both worlds in terms of durability and appearance.

Ultimately, the choice between water-based and oil-based polyurethane comes down to personal preference and priorities. It's important to do your research and talk to professionals to determine what will work best for your specific project. At [ Portland Refinishing by DeBuke ], we're happy to help you navigate this decision and provide expert guidance on how to achieve the look and durability you want for your hardwood floor. Contact us today for more information!

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

Is it cheaper to sand and refinish hardwood floors or replace them

Wed, 26 Apr 2023 17:26:55 GMT

Hardwood Floor Refinishing vs Replacement

Hey there, hardwood floor lovers! If you're reading this, chances are you're trying to figure out if it's cheaper to sand and refinish your floors or just rip them out and replace them altogether. Well, you're in luck, because as a hardwood refinishing company in Portland, we've got the lowdown on this topic.

First off, let's talk about sanding and refinishing. This is the process of removing the old finish from your hardwood floors and then applying a new one. This can be done multiple times throughout the life of your floors, and it's a great way to bring them back to their former glory. Sanding and refinishing can also fix minor imperfections in your floors, like scratches and small dents.

Now, let's talk about replacing your hardwood floors. This is a more drastic option, but sometimes it's necessary if your floors are beyond repair. This involves removing the old hardwood and installing new planks. This is obviously a more expensive option, but it can be worth it if you're looking to completely change the look of your space or if your current floors are in really bad shape.

So, which one is cheaper? Well, it depends on a few factors. The first factor is the condition of your current floors. If your floors are in decent shape but just need a little love, sanding and refinishing is probably the way to go. This is because it's a much cheaper option than completely replacing your floors.

On the other hand, if your floors are in really bad shape and have major structural issues, replacing them may be the only option. This can be more expensive upfront, but it can actually save you money in the long run because you won't have to constantly repair your floors.

Another factor to consider is the cost of labor in your area. Sanding and refinishing can be a labor-intensive process, so the cost of labor can vary depending on where you live. If you live in an area with high labor costs, sanding and refinishing may end up being more expensive than replacing your floors.

Lastly, you should consider the type of wood that your floors are made of. Some types of wood are more expensive than others, so if you're planning on replacing your floors with a more expensive type of wood, it may end up costing more than just sanding and refinishing.

So, there you have it, folks. The answer to whether it's cheaper to sand and refinish your hardwood floors or replace them is: it depends. It depends on the condition of your current floors, the cost of labor in your area, and the type of wood that your floors are made of.

At Portland Refinishing by DeBuke , we're always happy to help you figure out the best option for your hardwood floors. Our team of experts can assess the condition of your floors and give you a quote for sanding and refinishing or replacing them. We're committed to helping you get the most out of your hardwood floors, no matter what that means for you and your budget. Contact us today for more information!

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

Can you refinish wood floors yourself

Tue, 25 Apr 2023 19:54:11 GMT

DIY Wood Floor Refinishing

Hey there! If you're reading this article, chances are you're considering refinishing your wood floors yourself. And let me tell you, that's a commendable thought! However, before you dive in headfirst, let's explore the world of wood floor refinishing together and see if it's a task you should tackle on your own.

First things first, let's talk about what wood floor refinishing entails. It's essentially the process of removing the existing layer of finish from your hardwood floors and applying a new coat to give them a refreshed look. It's a great way to restore the beauty of your floors and add value to your home without replacing the entire flooring system.

Now, let's get down to the nitty-gritty. Can you refinish the wood floors yourself? The answer is yes, but it's not as easy as it may seem. Refinishing floors requires a lot of prep work, knowledge, and skills. If you don't have experience with DIY projects or don't feel comfortable using power tools, then it's probably best to leave this job to the professionals.

One of the biggest challenges of refinishing wood floors yourself is getting the old finish off. It's a messy job that involves sanding, scraping, and using chemicals to strip away the old finish. If you're not careful, you could damage the wood or create uneven spots that will show through the new finish. It takes a lot of patience and skill to do this right.

Once you've removed the old finish, you'll need to clean up all the dust and debris before applying the new finish. This is where attention to detail comes in handy. You need to make sure that every nook and cranny is clean and free of debris, or you'll end up with an uneven finish.

Applying the new finish is the fun part. But, it's also where a lot of mistakes can happen. If you don't apply the finish evenly or don't allow enough drying time between coats, you'll end up with a lumpy or streaky finish. Plus, if you use the wrong type of finish or don't apply enough coats, the finish won't last as long or protect the wood as well as it should.

Another factor to consider is the tools and equipment needed for the job. Refinishing wood floors requires specialized equipment like sanders, buffers, and applicators. If you don't have access to these tools or aren't familiar with how to use them, it's best to leave the job to the professionals.

Now, let's talk about the benefits of hiring a professional to refinish your wood floors. First and foremost, they have the experience, knowledge, and skills to get the job done right the first time. They also have access to the best tools and equipment, which ensures a smooth, even finish. Plus, hiring a professional saves you time and hassle, so you can focus on other things.

In conclusion, refinishing wood floors yourself is possible, but it's not for everyone. If you have the experience, knowledge, and skills to do it right, then go for it! But if you're not comfortable with the process, don't have the right tools, or don't have the time, then it's best to leave it to the professionals. At Portland Refinishing by DeBuke , we specialize in hardwood refinishing and have years of experience in the industry. So, if you're looking for a professional and reliable refinishing service in Portland, give us a call !

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

How long should you wait before returning furniture after floor refinishing

Wed, 19 Apr 2023 16:26:30 GMT

Wait Time For Refinished Floors

Hey there! So you just had your hardwood floors refinished by Portland Refinishing by DeBuke and you're wondering when you can put your furniture back in the room. It's a great question, and one that many people ask. The short answer is that it depends on a few factors, but generally, you should wait at least 24 to 48 hours before returning furniture to the room.

The reason why you need to wait is that the finish on your hardwood floors needs time to dry and cure properly. If you move furniture back into the room too soon, it can scratch or damage the finish, which will result in a less durable and less attractive floor. You don't want all the hard work and money you put into refinishing your floors to go to waste, so it's important to be patient and wait until the finish has fully cured.

The length of time you need to wait before returning furniture depends on the type of finish used, the temperature and humidity of your home, and the size of the room. Different types of finishes have different curing times, so it's important to ask your flooring professional for specific guidelines for your particular finish. However, as a general rule of thumb, oil-based finishes take longer to cure than water-based finishes and high-gloss finishes take longer to cure than satin or matte finishes.

The temperature and humidity of your home can also affect the curing time of your hardwood floors. If it's particularly hot and humid, the finish may take longer to dry and cure properly. On the other hand, if it's cooler and drier, the finish may cure faster. You should aim to keep the temperature and humidity in your home consistent during the curing process, as fluctuations can cause the finish to dry unevenly or take longer to cure.

The size of the room is also a factor in how long you need to wait before returning furniture. If it's a small room, the finish may cure faster than a larger room. If you're not sure how long to wait, it's best to err on the side of caution and wait at least 24 to 48 hours before moving furniture back in. This will give the finish enough time to dry and cure properly, ensuring that your floors look their best for years to come.

In addition to waiting before moving furniture back in, there are a few other things you can do to protect your newly refinished floors. First, avoid walking on the floors with shoes or high heels for the first few days, as they can scratch or damage the finish. Second, avoid dragging furniture across the floor, as this can also scratch or damage the finish. Instead, use furniture sliders or lift the furniture carefully and place it back in its original position.

In conclusion, how long you should wait before returning furniture after floor refinishing depends on a few factors, including the type of finish used, the temperature and humidity of your home, and the size of the room. As a general rule of thumb, you should wait at least 24 to 48 hours before moving furniture back in. It's better to be safe than sorry when it comes to protecting your newly refinished hardwood floors. If you have any questions or concerns, don't hesitate to contact Portland Refinishing by DeBuke for guidance and advice.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

Are floor refinishing fumes harmful

Tue, 18 Apr 2023 17:22:37 GMT

Hardwood Refinishing Fumes: A Guide

Hey there folks, we all know that refinishing your hardwood floors can be a great way to give your home a fresh new look. But some of you may be wondering, are the fumes from floor refinishing harmful to your health?

Well, let me tell you, as experts in hardwood refinishing, we take the health and safety of our clients seriously. So, we want to put your mind at ease by providing you with some information about the potential risks associated with floor refinishing fumes.

Firstly, it's important to note that the fumes produced during the refinishing process can be harmful if proper precautions are not taken. The fumes are caused by the chemicals used in the process, such as varnish, polyurethane, and stain, which can release volatile organic compounds (VOCs) into the air.

Exposure to high levels of VOCs can cause a range of health effects, including eye, nose, and throat irritation, headaches, dizziness, and in some cases, even more serious health problems. However, it's important to note that these risks can be greatly reduced by taking the proper precautions.

At Portland Refinishing by DeBuke, we take a number of steps to ensure the safety of our clients and our team during the refinishing process. This includes using high-quality, low-VOC products, as well as ventilating the area with fans and opening windows to allow fresh air in.

We also take care to properly seal off the area being refinished to prevent fumes from spreading to other areas of the home. And we always wear protective gear, such as masks and gloves, to minimize our exposure to the chemicals.

If you're considering refinishing your hardwood floors, there are a few things you can do to help ensure your safety as well. First and foremost, make sure you hire a reputable refinishing company that takes the necessary precautions to protect your health.

You should also plan to be out of your home during the refinishing process, as the fumes can linger for several days even after the work is done. And if you do need to be in the home, make sure you stay in a well-ventilated area and avoid breathing in the fumes as much as possible.

It's also important to note that certain individuals may be more sensitive to fumes than others. If you have a respiratory condition, such as asthma, or if you're pregnant, you may be at a higher risk for health effects from the fumes. In these cases, it's especially important to take the necessary precautions to protect your health.

In conclusion, while the fumes produced during hardwood floor refinishing can be harmful if proper precautions are not taken, there are steps that can be taken to greatly reduce the risks. By working with a reputable refinishing company and taking care to minimize your exposure to fumes, you can enjoy the beauty of freshly refinished hardwood floors without putting your health at risk.

If you have any questions or concerns about hardwood floor refinishing and the potential health risks associated with the process, feel free to reach out to us at Portland Refinishing by DeBuke . We're always here to help and provide you with the information you need to make an informed decision about your home renovation projects. Contact us now!

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

How Long Do You Have to Stay Off Hardwood Floors After Refinishing

Mon, 17 Apr 2023 19:11:58 GMT

You Need To Wait This Long After Hardwood Floor Refinishing

Hey there, hardwood floor enthusiasts! If you're planning on getting your floors refinished, you might be wondering how long you need to stay off of them after the process is complete. Well, let me tell you - it depends on a few factors.

First off, let me introduce myself. I'm Portland Refinishing by DeBuke, and we're the go-to hardwood refinishing experts here in Portland. We've been in the business for years, and we've seen it all. So, when it comes to staying off your newly refinished floors, we've got you covered.

So, how long do you need to stay off your hardwood floors after refinishing? The answer is - it depends. There are a few different factors that can affect how long it takes for your floors to be ready to walk on again.

The first factor is the type of finish you choose. If you opt for an oil-based finish, you'll need to wait a bit longer before walking on your floors. Oil-based finishes take longer to dry than water-based finishes, so you'll need to stay off your floors for around 24 to 48 hours. On the other hand, if you choose a water-based finish, you can typically walk on your floors within just a few hours.

Another factor to consider is the humidity and temperature of your home. If it's particularly humid or cold, it can take longer for the finish to dry. In these cases, you might need to stay off your floors for a bit longer than usual. Conversely, if it's hot and dry, the finish might dry more quickly, and you'll be able to walk on your floors sooner.

The type of hardwood you have can also affect how long you need to stay off your floors. Some hardwoods are more porous than others, meaning they'll absorb more of the finish and take longer to dry. If you have a particularly porous hardwood, you might need to stay off your floors for a bit longer than if you have a less porous hardwood.

Finally, it's worth noting that the type of traffic your floors receive can also affect how long you need to stay off them. If you have pets or children who are constantly running around on your floors, you might need to wait a bit longer before allowing them back onto the floors. Similarly, if you're moving furniture back into the room, you'll need to wait until the finish is completely dry before doing so.

So, how long do you need to stay off your hardwood floors after refinishing? As you can see, there's no one-size-fits-all answer. It really depends on a variety of factors. That said, a good rule of thumb is to wait at least 24 hours before walking on your floors. If you have a particularly porous hardwood or if the weather is particularly humid or cold, you might need to wait a bit longer. But if you opt for a water-based finish and the weather is relatively dry, you might be able to walk on your floors within just a few hours.

In any case, we recommend talking to your hardwood refinishing expert to get a more accurate idea of how long you'll need to stay off your floors. At Portland Refinishing by DeBuke , we're always happy to answer any questions you might have and provide you with all the information you need to make informed decisions about your hardwood floors.

In conclusion, getting your hardwood floors refinished is a great way to breathe new life into your home. Just be sure to give the finish ample time to dry before walking on your floors again. With a little bit of patience, you'll be able to enjoy your beautiful, newly refinished-floors for years to come.
Contact us now!

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

The Pros and Cons of installing Bamboo flooring

Thu, 13 Apr 2023 13:45:32 GMT

Bamboo Flooring Pros/Cons

Hey there, hardwood flooring lovers! Are you considering installing bamboo flooring in your home or business? Well, you're in luck because today, we're going to talk about the pros and cons of installing bamboo flooring.

First things first, let's discuss what bamboo flooring is. Bamboo flooring is made from a type of grass that grows in Asia. It is known for being eco-friendly because it grows quickly, making it a sustainable resource. It is also a popular choice because of its durability and unique look.

Now, let's dive into the pros of installing bamboo flooring.

Pros:

1. Durability: Bamboo flooring is known for its durability, making it perfect for high-traffic areas. It is also resistant to moisture, which means it is less likely to warp or cup over time.

2. Sustainability: As previously mentioned, bamboo is a sustainable resource because it grows quickly and is renewable. If you're looking to be environmentally conscious, bamboo flooring is a great choice.

3. Unique Look: Bamboo flooring has a unique look that is different from traditional hardwood flooring. It can give your space a modern and stylish feel.

4. Easy Maintenance: Bamboo flooring is easy to maintain. All you need to do is sweep or vacuum regularly and clean up spills as soon as they happen.

However, there are also some cons to consider before installing bamboo flooring.

Cons:

1. Cost: Although bamboo flooring is eco-friendly and durable, it can be more expensive than traditional hardwood flooring. It is important to factor in the cost when considering bamboo flooring for your home or business.

2. Susceptible to Scratches: While bamboo flooring is durable, it is also susceptible to scratches. If you have pets or children, you may want to consider a different type of flooring.

3. Limited Color Options: Bamboo flooring has limited color options compared to traditional hardwood flooring. If you're looking for a specific color or stain, bamboo may not be the best option.

4. Susceptible to Moisture Damage: While bamboo flooring is resistant to moisture, it is not waterproof. It can still be damaged by excessive moisture, so it is important to clean up spills immediately and avoid installing in areas prone to water damage.

In conclusion, bamboo flooring can be a great option for those looking for a sustainable, durable, and stylish flooring option. However, it is important to consider the cost, susceptibility to scratches, limited color options, and susceptibility to moisture damage before making a decision. If you're still unsure if bamboo flooring is the right choice for your home or business, be sure to consult with a professional flooring company, like Portland Refinishing by DeBuke , to help guide you in the right direction. Contact us now!

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

What are the best ways to protect your hardwood floors

Wed, 12 Apr 2023 18:06:44 GMT

Protecting Hardwood Floors

Hey there! If you're reading this article, chances are you're interested in protecting your beautiful hardwood floors . And I don't blame you - hardwood floors can be a real investment in your home's overall aesthetic and value. Lucky for you, there are plenty of ways to ensure your floors stay in tip-top shape for years to come. Here are some of the best ways to protect your hardwood floors:

1. Regular cleaning: It's no secret that dirt, dust, and debris can scratch and damage your hardwood floors over time. That's why it's crucial to clean your floors regularly to prevent buildup. Sweep or vacuum your floors at least once a week to get rid of any loose dirt or debris. For a deeper clean, consider using a microfiber mop with a gentle cleaner specifically designed for hardwood floors.

2. Protect against scratches: Speaking of scratches, it's essential to take precautions to prevent them from happening in the first place. Invest in furniture pads to place under your chairs, tables, and other furniture. Avoid wearing shoes with sharp heels or walking on your floors with any kind of grit or dirt on the bottom of your shoes.

3. Control humidity: Humidity can wreak havoc on hardwood floors, causing them to warp or even buckle. Make sure to keep your home's humidity levels between 35% and 55% to avoid any potential damage. Invest in a dehumidifier if necessary, especially during the hot and humid summer months.

4. Use area rugs: Area rugs not only add a decorative touch to your home, but they can also protect your hardwood floors from scratches and wear and tear. Place area rugs in high-traffic areas, such as hallways or living rooms, to minimize the impact of foot traffic on your floors.

5. Refinish your floors: If your hardwood floors are showing signs of wear and tear, it might be time to consider refinishing them. This process involves sanding down the top layer of your floors and applying a new finish to restore their shine and durability. Refinishing your floors can not only protect them from further damage but can also give your home a fresh new look.

6. Avoid harsh cleaners: It's essential to use gentle cleaners specifically designed for hardwood floors to prevent any damage or discoloration. Avoid using harsh chemicals, such as bleach or ammonia, as they can strip away the protective finish on your floors and cause irreversible damage.

7. Act quickly on spills: Accidents happen, and spills are inevitable. But it's crucial to act quickly when a spill occurs to prevent any potential damage. Use a clean, dry cloth to blot up any spills immediately. Avoid using water to clean up spills, as it can seep into the wood and cause warping or staining.

In conclusion, protecting your hardwood floors doesn't have to be a daunting task. By implementing these simple tips, you can ensure that your floors stay beautiful and durable for years to come. And if you're ever in need of hardwood refinishing services, don't hesitate to contact us at Portland Refinishing by DeBuke . We're here to help you protect your investment and keep your hardwood floors looking their best.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

Are walnut floors a good investment

Tue, 11 Apr 2023 17:35:16 GMT

Walnut Floors: A Solid Investment

Hey there, hardwood flooring enthusiasts! As a hardwood floor refinishing company based in Portland , we often get asked about different types of wood and their suitability for flooring. One wood that has been gaining a lot of attention lately is walnut. So, the question is: are walnut floors a good investment?

The short answer is yes, walnut floors can be a great investment. Let's dive into the reasons why.

Firstly, walnut is a beautiful wood. It has a rich, warm tone that can range from a deep chocolate brown to a lighter, reddish-brown. The wood has a subtle grain pattern with occasional swirls and knots, which give it character and interest. It's a timeless look that can complement any interior style, from traditional to contemporary. And, since walnut is not as commonly used for flooring as some other hardwoods, it can add a unique and luxurious touch to your home.

Secondly, walnut is a durable wood. It's a dense hardwood, which means it can withstand heavy foot traffic, scratches, and dents better than some other woods. It's also naturally resistant to decay and insect damage. With proper maintenance, walnut floors can last for decades or even a century, making them a solid investment in your home's value.

Thirdly, walnut floors can increase your home's resale value. Hardwood floors are one of the most sought-after features for homebuyers, and walnut floors can add a premium to your home's selling price. The unique and luxurious look of walnut can also set your home apart from others on the market, giving it a competitive edge.

Now, let's talk about some potential drawbacks to investing in walnut floors. One concern is the cost. Walnut is not as widely available as some other hardwoods, which can drive up the price. However, the investment can be worth it in the long run, as the durability and beauty of walnut can add value to your home.

Another consideration is the maintenance of walnut floors. While they are durable, they still require proper care to maintain their beauty and longevity. This includes regular cleaning and resealing, as well as avoiding exposure to excessive moisture or sunlight.

In conclusion, walnut floors can be a great investment for your home. They add a timeless and unique look to any interior, are durable and long-lasting, and can increase your home's value. While the cost and maintenance may be a consideration, the benefits of investing in walnut floors can outweigh these concerns. At Portland Refinishing by DeBuke , we are experts in hardwood refinishing and can help you bring out the best in your walnut floors. Give us a call to schedule a consultation and see how we can transform your home's interior with the warmth and beauty of walnut.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

Now Serving Southeast Portland

Mon, 20 Mar 2023 19:17:57 GMT

Are you looking to refinish your hardwood floors?

Our company is multi-generational when it comes to flooring. We were founded many years ago and our current owner is the son of many flooring professionals before him. We decided to heavily focus on wood flooring because of its beauty and impressive ability to last for ages. If you're floors look a little dated, we can help that with our wood floor refinishing service throughout Southeast Portland . Get a price from us first!

Why Refinish Floors?

Hardwoods are often considered one of the best investments a homeowner can make. These floors last a long time when property maintained and hold exceptional value over their lifetime. When potential buyers walk in to purchase your home, they often will praise the floor with statements like "wow look at these beautiful floors!" That's what refinishing can do for you and your home.

Here's what people miss sometimes. Mistakes in the refinishing process can cost you dearly with either replacement flooring. Both of these scenarios are troublesome for homeowners since the many DIYers think refinishing is easy. It can be easy when done correctly. Just be sure you know what you're doing!

Why Trust Us?

Few things are guara ntees in life. It's like the old saying "the only sure things in life are death and taxes." Sometimes that feels crazy and also true. Thankfully, our team is able to provide a service that is as close to perfect as you can get. We founded Portland Refinishing by DeBuke to be that one-stop-shop situation for all your flooring needs.

Whether you need to resurfaces some hardwood floors that have some minor scratches, or you want to completely re-stain existing floors to get a new color. Let the professionals help make the process smooth and seamless.

Refinishing is the most suitable option for homeowners operating on a limited budget, specifically if the floor is slightly worn. Rather than handling the entire room at once, you can do it in sections. Nonetheless, the time and commitment that goes into wrapping up such tasks are also worth consideration. Replacement is often faster when the process is hassle-free than refinishing planks encircled by others. The refinishing process usually takes up to a week, meaning the room will be unavailable for use for that period. Our professionals take up to 3-days to complete the job with the new flooring material.

Routine refinishing can as well be taxing. There is a possibility that you could be tempted to push the task forward until the damage becomes hugely severe, driving up the repair costs extensively. Also look into resurfacing which can help your budget.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham , Milwaukie , Metzgar , Lake Oswego , Clackamas, Damascus, Happy Valley , Troutdale and more

4 Factors To Determine Whether You Should Refinish Or Replace Your Wood Floors

Sun, 06 Nov 2022 02:59:42 GMT

If you're thinking of refinishing your wood floors, check this out

Are you torn between refinishing and replacing your worn, dull, and aged hardwood floors? If yes, you’re not alone, as many homeowners have found themselves in similar situations. Deciding which of the two options is ideal for your case depends on several factors, including the condition of your hardwood, its age, your preferences, and your budget. On top of that, it depends on your feelings toward the existing carpet. In this post, we’re going to look at the factors that mainly influence the decision to refinish or replace your hardwood floors.

Assess The Condition Of Your Floors

If your hardwood floors are considerably scratched or damaged and have been refinished severally, then replacing them could be the best option for you. However, if the scratches are minimal and the damage is moderate, then refinishing could be the ideal option in such a case. The other indication that your floor needs to be replaced is when your floors seem shaky or when the points where the boards should be attached become increasingly visible.

In addition, if specific parts of your hardwoods are highly damaged, refinishing also supports the revamping of those areas only. The main advantage of refinishing is that it allows the restoration of worn and aged floors into their formal state without costing o a lot of money and time compared to an overall replacement.

Your Budget For Your Floors

The amount that goes into refinishing hardwood floors is much lower than that goes into the replacement. Installing new flooring material is far much costly than refinishing the current one. In addition, it requires more manpower, particularly in an ample room. Moreover, the process is cumbersome since it entails several steps, including removing the aged flooring material, searching for new flooring, and purchasing all the necessary materials for an effective installation .

Refinishing is the most suitable option for homeowners operating on a limited budget, specifically if the floor is slightly worn. Rather than handling the entire room at once, you can do it in sections. Nonetheless, the time and commitment that goes into wrapping up such tasks are also worth consideration. Replacement is often faster when the process is hassle-free than refinishing planks encircled by others. The refinishing process usually takes up to a week, meaning the room will be unavailable for use for that period. Our professionals at Portland Refinishing take up to 3-days to complete the job with the new flooring material.

Durability Of Existing Floors

Hardwood is inherently durable, but more problems can develop as the material approaches the end of its useful life. However, that isn’t a far-reaching issue since refinishing can restore a fresh look to the floor. Staining, sanding, and sealing are the other methods that can yield desirable results by offering the floor an improved appearance.

While the most appropriate maintenance remedies for a durable hardwood floor have multiple benefits, they are also without downsides worth the attention. For instance, sanding for prolonged periods can exhaust the wood, making it very thin and susceptible to damage. That indicates there is a boundary to refinishing, as doing it a lot can compromise the structural integrity, leading to routine damages like cracking.

The replacement could be a cost-efficient and long-lasting solution if the floor has exhausted its lifespan. Some aged floors have severe damage, amounting to fruitless repair attempts. These comprise structural damage that impacts the chipping, frames, warping, termite invasion or lost planks on an extensive floor area. Wobbling floors can also point out underside problems that need an inspection.

If the damage is beyond 30%, then refinishing is no longer economical. Keep in mind that many hardwood floor problems stem from faulty installation, particularly issues that become visible one year after installation. Cupping is an example of such an issue, where the wood plank edges are elevated, and the central part drops down. This is a typical occurrence in homes with severe moisture issues underside. The planks take in the water and enlarge, prompting the edges to lift. This can be avoided through appropriate sealing during the installation of the floor. If the problem affects only a few parts of your room, then replacing the various impacted planks, followed by the installation of a working vapor barrier, can be adequate. Or else you’ll have to replace the whole room.

Cracks and chips can develop on the wood because of poor nailing irrespective of its lifespan. Lack of using cleats, the proper nail gun, or excessive pressure on the planks can prompt them to fracture. Refinishing or replacing the wood lies squarely on when you discover the problem and the severity of the damage. If the damaged plunk is surrounded by other planks, making it difficult to remove it effectively, embrace rejuvenation techniques to get it out.

The Appearance Of Your Floors

If you’re comfortable with the look of your existing floor besides wear and tear, refinishing is the right option to maintain the hardwoods in your possession. However, if you’re not impressed with the appearance of your hardwood and are longing for a new type of flooring, then replacement is the best option.

If you’re looking to refinish or replace your hardwood flooring and are based in Oregon, then look no further than Portland Refinishing company, as we’ve got you covered. We boast several years of experience in the hardwood flooring industry, providing a range of services, including refinishing, replacement, sanding, staining, and many more. Feel free to contact us for any of these services and request a quote.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

5 Signs You Need To Refinish Your Wood Floors

Sun, 06 Nov 2022 02:09:40 GMT

These Are 5 Easy Reasons That You Need Refinishing On Your Hardwood Floors

Due to its elegance and durability, hardwood flooring is undoubtedly one of the most adored flooring types among homeowners. Hardwood floors are known to add warmth and beauty to your home and enhance its resale value.

However, despite this material being extremely durable, it demands regular care and maintenance to remain functional and visually appealing. Like with any other type of flooring, hardwood flooring has a useful lifespan and once exhausted, there will be only one viable option, which is to replace it altogether. Nevertheless, cases such as faded colors, light scratches, tiny marks, etc., can be addressed by refinishing, which is more cost-effective than replacing the whole thing.

Suppose the signs of deterioration are discovered on time. In that case, it is possible that they can be fixed early enough to avoid inflicting massive damage to the floor, which would necessitate a total replacement. So, how can you tell it’s time to refinish your hardwood floors? Watch out for these tell-tale signs.

Excessive Scratches

Scratches will continually develop on hardwood floors when in use. However, you need to worry less about every minor scratch that happens on your floor. There are a handful of measures to establish when it’s appropriate to refinish your hardwood flooring.

Firstly, if there are numerous scratches showing up via the stain, then that’s a clear indication that your hardwood floor needs a bit of refinishing. If they’re still visible even after an area rug is rested above them, then that’s a signal that your floor has worn out.

However, you need to determine if the scratches are distributed over a sizable area or outwardly in the stain and not undermining the wood underside. If the surface is not impacted in any way, then the issue is mild.

But, if the scratches are deep and negatively affect the wood, your floor needs refinished.

Water Damage

It’s well known that hardwood dislikes water. If water is left to pool over the hardwood floor, it can destroy it beyond redemption.

If you notice slight evidence of water damage, there may be a likelihood of rescuing your wood floors. The most suitable time to act on the water damage is immediately after it occurs.

When you discover a leak or spill, dry the affected part right away. The most severe damage occurs when you fail to detect leaks or spills on your floor.

Failure to dry the water promptly can result in buckling in the floors, which could necessitate the replacement of the entire floor. For slight damages, such as dark stains, you don’t need to replace the floor entirely but refinish it.

Discoloration

This is yet another tell-tale sign that your hardwood floors need to be refinished. Most homeowners tend to associate gray discoloration with aging, which is usually not the case.

It mainly occurs due to minor water damage. Over time, the sealant protectant applied on the wood will wane, exposing the wood underneath.

Water often spills onto the floor of the kitchens, which are covered with hardwood. No matter how insignificant these amounts of water may be, they can inflict severe damage to your floors over time.

When wood and water combine, they oxidize, giving rise to grayish discoloration. The moment you discover the presence of gray discoloration on your floors, schedule a consultation with your favorite Hardwood Refinishing contractors in Oregon, to have your hardwood floors refinished.

Failure to act will see the gray discoloration turn black. Discoloration that persists weakens the structure of the wood, necessitating its replacement entirely.

Fading Floors

We all love natural light. However, huge windows are a great liability on your hardwood floors. Intense sun damage is an indication that your hardwood floor perhaps requires to be refinished. The damage results from the ultraviolet (UV) rays originating from the sun.

Perhaps, the floors might appear somewhat faded or in bad shape near the windows.

To find out if there are incidences of sun damage, move the area rug, and if your floor experiences sudden color changes, then it’s time to refinish your floor.

This problem can be quickly addressed by sanding and refinishing since you’re after eliminating the faded stain.

Splintering in Floorboards

Intense foot traffic, naughty kids, pets, and age are some of the leading causes of splintering floorboard edges. These splinters and damaged edges can result in accidents and demand costly replacement. They seem unsightly and can turn into an avenue through which water finds its way into the floor. As long as the splinters are not extremely big or severe, they can be easily fixed through sanding and floorboards.

If you’ve noted any of the discussed-above tell-tale signs, it’s time to refinish your hardwood floors. It’s prudent to have your worn-out hardwood floors refinished professionally, as this will enhance their appearance and extend their longevity. If you’re in Oregon and looking for a professional hardwood refinishing company, look no further than Portland Refinishing, as our contractors are trained professionally to undertake refinishing projects.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

How to choose the right stain color when refinishing wood floors?

Mon, 26 Sep 2022 17:23:56 GMT

How to choose the right stain color when refinishing wood floors

Having a hard time thinking of what is the right stain color for your wood floor? Want to have something that is refreshing and fascinating in your eyes? Don't have any idea on how to choose the right one? Stop thinking and worrying about it! Because we got you on that. We are here to help you to know the best things you should consider in choosing the right stain color when refinishing your wood floors.

The best and most exciting but also intimidating thing when you are doing a construction is choosing the right stain color for your wood flooring . It will be the life and design of the wood floor that can affect the overall look of your property. You will also have the power to choose it depending on your preference or choice of design. You need to make sure that you will be able to pick the perfect color for you not to regret it.

Things to check before choosing the right stain color

It is important that you understand the characteristics and status of your current flooring. There are so many different types of wood in the flooring that will affect the outcome when you put the color stain , so you need to make sure that you will choose the perfect one for your current flooring. There are some flooring that when you pop water on it, it will allow the stain to go deeper and spread evenly which is a good factor.

Tips on choosing the right stain color for your wood flooring

You need to decide if you will be planning to go lighten or darken your flooring in the future. Because it will help you to know if what will be is the right stain color to choose for your wood flooring. If you decide to choose a dark color for now, then it is better that in the future if you plan to change it again, go for something dark as well so it will not be so hard and risky.

Ready and have a cleared vision in your mind on what you like to achieve in the output of your flooring. It is important that you know what you want. Because it will be a lot easier to turn it into reality than changing decisions from time to time. It will cause so much hassle and wasted time.

If you are into a lot of movements it is necessary for you to choose a lighter color of wood. It will be easier to make changes into it and also to combine or partner it with your furniture. It will not be off in the eyes and it will also give a great ambiance and soothing feeling in the whole space

If you are into less movement, it will be great to choose the mid to dark colors of a wood, for it will give a stronger appearance. It will not fade so easily as well.

Never hesitate to talked with the experts in this field

Getting opinions or advice from the expert is very important because they are knowledgeable in the field and they will definitely give you the best stain color advice that will suit your property. So just give us a call and we will definitely help you to have the perfect color stain for your wood flooring. And together, let's bring your idea and vision into reality.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

Hardwood Floor Scratch Repair

Tue, 30 Aug 2022 19:04:12 GMT

How to repair scratched hardwood flooring?

When owning new things, we always make sure to keep them in good condition to last for long years so that we can enjoy every investment that we put into it. Just like owning a first car, we always clean it to make it shiny, we use it with extra care and always check for any dents or scratches. The same as having hardwood flooring in your lovely abode, it might be difficult but we always try to prevent any scratches but fail that is why we are trying to seek help for floor repairs .

Just like our first car, we never want someone who got dirty shoes inside our house to prevent dirt or mud that can possibly scratch our perfect newly installed hardwood flooring. Sometimes we even ask our visitors to remove their shoes or check them first before entering. That is how much we try to take care of it. But we can not be like that forever, so here are some ways how to prevent scratches on your hardwood flooring:

Weekly basic care and cleaning. A weekly dusting and cleaning is a must to keep the hardwood floor in great condition. Clean the floor with a microfiber duster and clean pads with a pre-moist cleaner product that is intended for hardwood flooring.

Foot traffic consideration . There is a certain style of shoes that can damage your hardwood floor. Most of the time it’s the high heels shoes that should be off-limits.

Place pads on the bottom of any furniture that you will move. I guess that is understandable that chairs and tables that we constantly drag will cause some scratches to our hardwood flooring, so protect it by placing pads or towels on the legs of your sofa or any furniture before moving it.

How to repair scratched hardwood flooring?

For minor scratches: Prepare floor cleaner, soft cloths or microfiber, water, steel wool, wood wax repair sticks, and sandpaper.

Clean the area . Use the microfiber cloth with some floor cleaner to clean the scratch and immediate area to ensure that there is no dirt during the repair process.
Wipe it clean . Wipe off any excess floor cleaner until it is completely dry, and use another microfiber cloth for this.
Use steel wool . To completely scrub any dirt, rub steel wool gently into the scratch area, and rub it with the grain of the wood only.
Use sandpaper . To have the same floor texture, use sandpaper to buff the edges of the scratch and immediate area.
Apply wood wax repair stick . Cover the scratch area with a wax stick, gently apply it, and let it penetrate the floor for about 10 minutes.
Buff it ! Buff the area using a clean soft microfiber cloth and add a layer of protective coating and buff it out.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

Can You Mop Unsealed Hardwood Floors?

Wed, 24 Aug 2022 18:48:49 GMT

Is it possible to mop unsealed hardwood floors?

Most homeowners invest in making their homes presentable and beautiful to look at. And not only that, they invest in something that can make their family well protected and live in a manner that they deserve. That is why every material used in every part of the house should be chosen according to its purpose, durability, and beauty. And one example of that is using a hardwood floor. It is elegant, that never goes out of style, and can last for long years.

Wood floor maintenance can be easy if you know if the surface is sealed or unsealed. This also means that as an owner, it is important to know if your hardwood floor is finished or unfinished so that you will know what type of cleaning materials you should use or the maintenance that you should apply.

Those sealed or finished wood floors had been treated with synthetic resins such as polyurethane or urethane. It acts as a protective barrier against humidity, moisture, scratches, and daily wear and tears on the wood which is why you don’t need to use strong chemicals for cleaning the surface.

The unsealed or unfinished hardwood floors are vulnerable to any environmental elements because it does not have a coating sealant that can protect it. Its surface should be properly clean with a microfiber cloth first and then wipe away the dirt before applying a sealant to seal it. Unsealed wood floor requires proper care and trying to avoid any contact with water to make it last longer.

Unsealed or not, always mop with a dry cloth the area where there is a liquid. But avoid mopping with water to the unsealed hardwood floor or any liquid cleaning solution because it will cause moisture in the vulnerable part of the wood.

Cleaning unsealed hardwood floors :

Vacuuming - It is one way of taking care of your wood floor for it will sip all the dust that is there waiting to be noticed. Doing that every week will make the floor clean and well-maintained, but you should choose the right type of vacuum that will not leave any scratches on your floor. Avoid using a beater bar vacuum and choose a canister vacuum to prevent any floor damage.

Mopping - Even if you will properly vacuum or sweep the floor there is still dirt that needs to be clean, and those are the stubborn oil and grime. These need to be mopped with a dry or damp mop and a natural cleaner. When using a damp mop, always make sure that it is completely wring out, and dry out with a towel to remove moisture. And after mopping, always check for any moisture and wipe it out to prevent absorbing it.

Sweeping - A soft bristle broom is perfect for removing dirt, hair, and other debris that shouldn’t be there. It is good for unfinished wood floors because it can’t cause any scratches or damage.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

How To Get Dark Stains Out Of Hardwood Floors?

Fri, 19 Aug 2022 19:33:26 GMT

How to remove dark stains from the hardwood floors?

Having a beautiful house is something that you can be proud of. It is one of the products of your hard work. But no matter how much we take care of our great investment there will always come a time that it will be affected by wear and tear especially the wood flooring that has always experienced traffic.

That traffic can create defects and stains that are hard to remove no matter how many times you will clean it. Sometimes it takes a long time to remove it even if you regularly clean the floor. When it penetrated the inner surface, it will develop into dark ugly stains and the thing that can remove it is through a unique method by those hardwood refinishing experts.

One of the most floor stained part of the house is the kitchen, this is where food is accidentally spilled especially when you have kids in the house. The common causes of those unattractive dark stains on our floor are those water marks from wet feet or containers, pen ink that most kids use, our pet's urine or feces, accidental blood stains, etc.

When cleaning a hardwood floor especially if it is not sealed, we should avoid using steam mops, and some hardwood floor stain remover products because it can damage the floor and make it worst. When the wood floor is not sealed, it is better to use a dry cleaning method just like sweeping with a soft bristle broom to avoid scratches, vacuuming those dirt, or dry mopping. But if you are not satisfied with dry cleaning, you can use a microfiber cloth with a little warm water to gently rub the floor.

Steam mopping an unsealed wood floor can cause the growth of molds because of the moisture it brings. Not only steaming but ceiling leakage can also be a source of stains and molds that we try to avoid.

Removing dark stains from the hardwood floors

Pet urine is one of the hard stains to remove because it contains elements like chloride, ammonia, and potassium. Those elements make it quickly absorb into the wood and cause a permanent stain. Removing it requires you to sand it or replace the wood. There are products available in the market for removing pet stains on the hardwood floor , but you have also an option to try these as a remedy before hiring an expert:

Prepare hydrogen peroxide, vinegar, and baking soda.
In a bucket, mix the same amount of a cup of warm water and white vinegar.
Scrub the stain using the liquid solution.
And to fully remove the odor and stain, mix baking soda and vinegar to form a paste. Put those paste into the stain until it dries. After that wipe the paste using a microfiber soft cloth.
On the next day, soak a cotton cloth in hydrogen peroxide and put it on the stain for at least 7-8 hours or overnight.
Repeat if the stain is stubborn. It will bleach your wood floor which is why sanding and refinishing are required. And applying a new wax coat. And also buffing after waxing and resealing it.

Some of the other stain remover

Lemon oil - It is good for water stains or water marks. Gently rub it on the wooden floor.
Chlorine - It is a household bleach that can possibly remove food spills, blood stains, ink stains, and other related stains on a hardwood floor.
Oxalic Acid - It is used for the moderate treatment of rust stains, aged black discoloration, and black water spots. The strongest and last option to use is the two-part kit.

Clean the area before applying bleach and always remember to read and follow the manufacturer’s instructions on its label. And don't forget to wear protective gloves and a mask to avoid inhaling it.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

What is dustless floor refinishing?

Tue, 02 Aug 2022 17:17:36 GMT

The dustless floor refinishing process

Home renovation is an investment that will improve your property and your way of living by giving you a comfortable feeling. It can be messy and dusty during the process, but everything is worth it after seeing how beautiful and comfy the result will be. Just like floor refinishing , it is indeed dusty but will create a big difference when finished.

When your hardwood floor looks old and obviously needs some repair, then it is the right time to install a new wood floor or maybe consider refinishing it to revive its beauty. But it all involves dust and that is one of the major concerns why some homeowners are hesitant to renovate their homes. But we want to let you know that there are different refinishing techniques that you can choose depending on your preference.

What is dustless floor refinishing?

For those allergic to dust and do not want to clean up some mess after the process, there is a method that can be dust-free, and that is dustless floor refinishing. It is not the same as the other techniques or procedures nor has the same result, but it is safe for everyone in the house, especially if you have kids. Refinishing is also a great option when installing a new one isn’t your budget, but you still need to give it a fresh look.

Those scratches, small dents, scuffs, discoloration, and other wood floor minor defects can be removed without worrying about possibly inhaling the dust. Because the dustless floor refinishing technique uses the finest equipment to produce an efficient result and a dust containment system is attached to our sanding equipment to ensure that any debris won’t spread anywhere and gives a dust-free floor refinishing that isn’t harmful to all who is around.

What are the difference between dustless floor refinishing and sandless floor refinishing ?

The sandless technique does not guarantee to be dust-free just like what was advertised, and it uses chemical liquid to remove those floor impurities. And that is the reason why some people aren’t satisfied with the result because it just simply cleans your floor. Sanding is important when refinishing a floor because it removes the old finish to apply a new one.

It is also important to find a reliable flooring contractor to help you decide which one is better for you and your family when renovating your floor so that you will have 100% satisfaction guaranteed.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

How To Remove Broken Staples From Hardwood Flooring?

Fri, 29 Jul 2022 20:06:27 GMT

Removing broken staples from hardwood flooring

Everyone wants to live in a beautiful and comfortable house because that is a great reward that we get from working hard. Renovation is not just updating the house’s design and style, but it is a great opportunity for investing in something that could improve the quality of life, extends the house’s lifespan, and increase its market value. A long term investment that you and your family will enjoy.

Comfort and enjoyment are one of the many reasons why we remodel our houses. We always want it to have a cozy atmosphere to make it a home that we always come home to. And the part that has been always misused and abused is the floor for we keep on stepping on it many times a day and multiple times when we have many visitors, which is why it should be included in renovations. Having a flooring contractor is a must to ensure its quality that could last for long years, for they know exactly what techniques to apply.

One of the common questions that some people ask when doing a DIY or do it yourself floor renovations is how will they remove those broken staples. First of all, wood expands and changes its natural shape and size when exposed to moisture, that is why we need to put something like staples or nails so that the wood will be attached to the subfloor and will perform its function well. And staples have two prongs that make them known to hold stronger.

When removing it, you need to have specific construction tools like pliers (end nipper pliers) or the hook blade of a utility knife. The End Nipper Pliers is a good tool to use when removing staples because it is a type of pliers that has a rounded side, perfect for pulling the staples from the wood for it will not damage it.

It is important to know the kind of tool to use before renovating the floor to avoid wasting time and effort. And it would be advisable to find a reliable floor contractor to achieve your expectations.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

Can I Refinish Hardwood Floors Without Sanding?

Wed, 20 Jul 2022 16:30:39 GMT

Is sandless refinishing hardwood floor possible?

It is important to have proper maintenance of our beloved abode because no matter how solid its foundation, it will develop some issues as time goes by. We never want that to happen, especially when that property is so dear to us for its precious memories that we used to share with family.

Aside from the house’s roof, the floor is one of the essential parts where it needs to be neat and well maintained, for it is walked and abused thousands of times every day. Most people who have wooden floors prefer floor refinishing because of the fact that they can save money and still get the same effect in a newly installed one.

Floor refinishing involves sanding. This process can be a great mess for dirt will circulate throughout the whole area, and that is the reason why some people don’t choose that. But there is a solution to that, we can refinish without sanding.

Our previous blog talks about how the sandless refinishing floor works saying; “Some people wonder if is there any way of refinishing without sanding. Yes, there is. But the result won’t be as great as being sand. Yes, it can remove old floor wax and some minor stains. But heavy stains, scratches, gray areas because of oxidation, dents, and the sun fade will not be removed when sanding is not part of the process.

So how does sandless floor refinishing work? From the word sandless, this process of floor refinishing does not include sanding. The flooring contractor will use a refinishing machine with abrasive pads and a liquid chemical to scrub off the unwanted dirt that is already sticking to the surface. And because there is no sanding involved, the dirt and dust have just remained in the liquid solution which is the advantage part of choosing this process. After that, the protective sealer will be applied to make it shiny and can last long years.”

You can try to DIY or do it yourself in making home renovations, but it is much better to hire a professional to avoid making mistakes that can damage your property.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie, Metzgar, Lake Oswego, Clackamas, Damascus, Happy Valley, Troutdale and more

How does "sandless" floor refinishing work?

Sun, 26 Jun 2022 15:56:13 GMT

What is the process of sandless floor refinishing?

Every homeowner should know the responsibility of keeping a well maintained house so that it will last for many years. Because let’s admit it, a dream house won’t be as good as day one as years go by. Especially if there is no proper maintenance by the owner and if it experiences some disaster that we can not avoid.

One of the areas that are always in use is the floor, it is the first thing that easily gets dirty, and everyone will notice that. And if you have a wood floor, it would be impossible not to have scratches, dents, stains, and other impurities that can decrease its beauty. Hardwood floor refinishing is a quick and budget friendly solution to that compared to replacing everything.

Just like a replacement, refinishing a floor that is made of wood is definitely messy. All the dust from sanding the wood will annoy you, especially if you are allergic to dust. But after that, you will be happy when you see the shiny result. You will feel like it is brand new for it will freshen up the room and give you a great vibe at a low cost.

Because of that, some people wonder if is there any way of refinishing without sanding. Yes, there is. But the result won’t be as great as being sand. Yes, it can remove old floor wax and some minor stains. But heavy stains, scratches, gray areas because of oxidation, dents, and the sun fade will not be removed when sanding is not part of the process.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham, Milwaukie hardwood refinishing , Metzger wood floor refinishing , Lake Oswego hardwood refinishing , Clackamas, Damascus hardwood floor refinishing , Happy Valley, Troutdale and more

What is the best time of year to refinish hardwood floors?

Mon, 13 Jun 2022 20:03:33 GMT

The best time to refinish hardwood floors

We all want to build our dream house because that keeps us feeling fulfilled and living comfortably. And everyone will agree that every home needs to be well maintained because that is where we get protected from different types of weather. It should be taken care of by checking for any part that needs some repair. That is one way of prolonging its lifespan.

For those people who have been living in a house for long years, it is necessary to consider hardwood floor refinishing because we all know that our floor is the number one part of that house that is always in use. No time of the day that we never step on our floor, especially when we have special occasions where we invite many people inside our house.

Why do we need to refinish hardwood floor ?

Part of refinishing is of course, sanding the floor. That is when the floor becomes bright and looks new because it takes away all the dust and impurities that is making it look dull and old.

Letting a professional do this job means that all those dents, scratches, and other minor damage to your floor will all be gone. There is a great possibility that it will look like how it was on day 1.

That minor floor damage is like an opening portal for those pests like termites, ants, etc., that can ruin the wood. Refinishing can protect it from letting them enter through its layer.

Refinishing a hardwood floor is less expensive than replacing those floors with a new one.

It can increase its home value. Having a well-maintained home can impress any guests, and whether we admit it or not, it makes us feel happy for doing a great job. And for those people who plan to put their house on the market, refinishing the floor is a great way to attract buyers without spending too much.

What is the best time of year to refinish hardwood floors ? The ideal time of the year to do it is during fall or spring. Because that is the time that the temperature is a little bit neutral, we can easily open our windows and door to let all the dust and smell out of the house. But it all depends on every situation. You can’t just wait for those seasons just to have it if you are in a hurry.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard , Beaverton , Gresham hardwood floor refinishing , Milwaukie, Metzgar, Lake Oswego, Clackamas hardwood floor refinishing , Damascus wood floor refinishing , Happy Valley, Troutdale floor refinishing and more

How Many Times Can Hardwood Be Refinished?

Thu, 09 Jun 2022 19:39:24 GMT

Can a hardwood be refinished many times?

Our house is where we build most of our important memories with family and friends. Most of the time, it is where we celebrate yearly occasions. And that would be the time that we love to invite many visitors to come and join us. And during those times, our floor is one of the most overused parts of the house that we never notice until it gives up.

A hardwood refinished is just a small investment that you can make to your home because it is one way of extending the lifespan of your floor. It is like taking away those old worn-out layers that have lots of scratches and damage. And when then a new layer is exposed, that is the time to reapply a chemical that can prolong the floor’s lifespan.

Choosing floor replacement over refinishing can cost you more. That is why most people who are on a budget but got floor damages that need an immediate fix decide to contact the hardwood floor refinishing contractors for help. Hardwood floors can last for 20 to 30 years if it is appropriately maintained.

The number of times that you can refinish a hardwood floor depends on how severe the damage is. But the usual is up to 10 times. It needs a skilled expert to do it so it will last that long because there are proper techniques that only experts in that field know well.

These are some of the reasons why those certain homeowners choose floor refinished over floor replacement aside from being non-expensive:

Certain parts have scratches - There is no need for replacing it if the only issue is some scratches in a particular area.

Unappealing looks - Due to being a worn-out floor, it is normal for it to look unappealingly dry and old. And that is an excellent time to bring back its fresh new look.

Noticeable difference - Due to its age, the heat of the sun, and mainly being overused, the color of the floor will surely change. And that is just a slight issue that can be quickly resolved with sanding and refinishing.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard hardwood refinishing , Beaverton hardwood floor refinishing , Gresham, Milwaukie hardwood floor refinishing , Metzgar wood floor refinishing , Lake Oswego floor refinishing , Clackamas, Damascus, Happy Valley hardwood floor refinishing , Troutdale and more

What Is Hardwood Floor Refinishing

Mon, 04 Apr 2022 19:11:41 GMT

Here is What Hardwood Floor Refinishing Is:

Refinishing hardwood floors is the concept of stripping the wood floors of their top most layers, and reapplying a new layer on top. At it's most basic, that is the entire premise. How its accomplished can vary depending on a few factors.

Are you looking to change the color of the hardwoods? Or are you just trying to shine them up and restore them? Because you might just need a resurfacing job instead of a full refinish. Or possibly you need to replace and install new floors instead.

Refinishing hardwood floors involves taking a high quality floor sander and stripping the top poly layer and usually the top few millimeters of the actual wood floor to get to the unfinished floor. At this point, the wood can be refinished any way you want. Do you want a color change? Now is when you would add the stain to the wood because it is raw.

Refinishing can also be used if the floors have had some damage.

Areas That We Serve

Here's many of the areas around Portland that we serve with refinishing:

Tigard hardwood refinishing , Beaverton hardwood refinishing , Gresham, Milwaukie hardwood refinishing , Metzgar hardwood refinishing , Lake Oswego, Clackamas, Damascus, Happy Valley hardwood refinishing , Troutdale and more